HP V1910 - How to Enable Full Command Line Access for SSH or Telnet Management

Printer-friendly versionPDF version
HP V1910-48G Switch Command Line Access Configure

The HP V1910 switches are powerful and economical switches. By default, you can only manage them through the web interface. Even if you enable SSH or Telnet, the commands available are minimal. Here is how to configure SSH or Telnet, enable it for your user account, and enable the full range of commands that are disabled by default. The model in this example is an HP V1910-48G:

Log into the web interface, and go to Network > Service. Enable SSH or Telnet and click apply (please don't enable telnet, really, just use SSH...):

HP V1910-48G Switch Command Line Access 1

Go to Authentication > Users. Enable SSH or Telnet for the user account you will be connecting with:

HP V1910-48G Switch Command Line Access 2

You can now log into the switch using your favorite SSH or Telnet client. As you see, there are only 7 command available, and none of them are going to help you configure the switch:

HP V1910-48G Switch Command Line Access 3

HP V1910-48G Switch Command Line Access 4

To enable the full suite of commands, run the following command (the default password is 512900):

_cmdline-mode on

HP V1910-48G Switch Command Line Access 5

Here are all of the commands available now:

User view commands:
  archive        Specify archive settings
  backup         Backup next startup-configuration file to TFTP server
  boot-loader    Set boot loader
  bootrom        Update/read/backup/restore bootrom
  cd             Change current directory 
  clock          Specify the system clock
  cluster        Run cluster command
  copy           Copy from one file to another 
  debugging      Enable system debugging functions
  delete         Delete a file 
  dir            List files on a file system 
  display        Display current system information
  fixdisk        Recover lost chains in storage device
  format         Format the device
  free           Clear user terminal interface
  ftp            Open FTP connection 
  initialize     Delete the startup configuration file and reboot system
  ipsetup        Specify the IP address of the VLAN interface 1 
  lock           Lock current user terminal interface
  logfile        Specify log file configuration
  mkdir          Create a new directory 
  more           Display the contents of a file 
  move           Move the file 
  ntdp           Run NTDP commands
  password       Specify password of local user
  ping           Ping function 
  pwd            Display current working directory 
  quit           Exit from current command view
  reboot         Reboot system
  rename         Rename a file or directory 
  reset          Reset operation
  restore        Restore next startup-configuration file from TFTP server 
  rmdir          Remove an existing directory 
  save           Save current configuration
  schedule       Schedule system task
  screen-length  Specify the lines displayed on one screen
  send           Send information to other user terminal interface
  sftp           Establish one SFTP connection 
  ssh2           Establish a secure shell client connection 
  stack          Switch stack system
  startup        Specify system startup parameters 
  summary        Display summary information of the device.
  super          Set the current user priority level 
  system-view    Enter the System View
  telnet         Establish one TELNET connection 
  terminal       Set the terminal line characteristics 
  tftp           Open TFTP connection 
  tracert        Trace route function 
  undelete       Recover a deleted file 
  undo           Cancel current setting
  upgrade        Upgrade the system boot file or the Boot ROM program
 
For an expanded list of commands, check here
 
If this was helpful to you, please leave a comment below and let me know! Personally, I think these commands should be enabled by default. I'm not sure why the default command line access is so limited.

what password do you use in response to the _cmdline-mode command the login password says invalid on my switches.

It's in the article above (you must not have read it):

 

512900

I am using v1920 and this password is not working

try this:
Jinhua1920unauthorized

Hi Kabelo,

The password is Jinhua1920unauthorized (the first letter is Capital).

Please try it!

~Kafka

Hi Kabelo,

The password should be Jinhua1920unauthorized (Please remind that the first letter is capital)

~Kafka

default password is 521900

Thanks! Although the cli is not very intuitive or adheres to standards, e.g. "shutdown" of a port is usually reversed through "no shutdown" but on this switch it's "undo shutdown".

And since this switch isn't really intended to be configured from the cli why the console cable?

I'm on the 1910-8G-POE+ switch btw, pretty happy with it though.

You only entered the "user-view" where you can mainly display information, but not configure anything. Maybe you should mention the command "system-view" by which you can enter a higher level of access. In "system-view" you can configure literally everything even features which can't be configured through the web interface such like ospf etc.

Thanks for share!
Is it possible to permanent apply this setting? At this moment, I have to repeat this command every time that I connect to the device.

Regards

Hello Friend. I upgraded the V1910 - Version: 1910_5.20.R1516
After reboot it no longer accesses.
It is only with the light blinking .. You have some solution.
I thank the attention.

Post new comment